Kunz rough cut Mower

Rough Cut Mower AcrEase Model MR55BE

$4,570 + GST

Top of the line 57″ rough cut model with a commercial grade twin cylinder electric start engine and electric clutch blade engagement.  Works great behind an ATV, UTV or small tractor for larger acreage jobs.

Features (specs, highlights, etc)

  • 57″ Cutting Width
  • 27 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
  • Commercial Grade Deck Assembly
  • 4 Tire Design
  • Quick Two Crank Height Adjust System
  • Height Adjustment Range From 2″ to 8″
  • Electric Clutch Blade Engagement
  • Conservative 2″ Diameter Sapling Rating
  • Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.

Specifications

MODEL MR55BE
Class Mower Rough Cut (Rear Discharge)
Engine Make OHV Briggs & Stratton Commercial
Engine Model Commercial Turf Twin
Engine HP 27
Lubrication Method Pressure With Filter (Low Oil Pressure Shut-Off Included)
Air Filter Type Cyclonic Air Filtration System
Electric Start (Battery not included) Yes
Hour/Tach Meter Optional
Number of Mower Blades 2-30″
Blade Tip Speed (ft/min) 19000
Cutting Width 57″
Cutting Height 2.0 to 8.0 By Two Cranks
Hitch Direct Behind or Full Offset to Either Side
Blade Engagement Clutch Electric Clutch
Deck Metal Thickness 10 GA (.135″)
Deck Top Plate Thickness Two 1/4″ Thick Plates
(Blade Spindle Attachment Area)
Weight 580 lbs
Pneumatic Fixed Rear Tires 15/600×6, 4 Ply Tubeless (Flat Proof Option Available)
Pneumatic Front Tires on Casters 5.30/4.50×6, 4 Ply Tubeless (Flat Proof Option Available)
Fuel Tank Size 3 Gal.
Blade Spindles
Shaft Size 30 mm (1-3/16″)
Bearing # 6206-2RST
Drive Method 1 B Section “V” Belt (Kevlar)
Request a Quote
Category:

Description

RC MR44BC MR55B MR55BE Engine27HP Briggs & Stratton Commercial Turf commercial grade twin cylinder engine

RC roughcut spindle 2016The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16″) steel shafts, machined steel blade holders and large sealed ball bearings.

RC 57RC Height AdjustThe cutting height can quickly and easily be adjusted from 2″-8″ with the two crank height adjustment system.

RC Roughcut DeckThe main deck is built out of 10 GA (.135″) thick steel with a 1/4″ thick steel top plate for reinforcement. An additional 1/4″ thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just over 5/8″ thick.

RC roughcut undersideUnique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.

RC Electric Clutch ModelsThe blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance.

RC ATV Tongue ClevisThe tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.

RC Fuel Tank 3.25 GallonLarge 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time

Related products